Abstract
Experiments were carried out on jets issuing from circular nozzles with grooved exits and the results compared with those of the plain nozzle. The plain nozzle had an exit diameter of 10mm. Because of the introduction of semi-circular grooves at the exit, the effective or equivalent diameter of the grooved nozzles was 10·44mm. The groove lengths were varied as 3, 5 and 8mm. The nozzles were operated at fully expanded sonic and underexpanded exit conditions. The corresponding fully expanded Mach numbers were 1·0 and 1·41. The shock cell structure of the underexpanded jets from grooved nozzles appeared to be weaker than that of the plain nozzle, as indicated by lesser amplitudes of the cyclic variation of the Pitot pressure. The iso-Mach contours indicate that the jet spread along the grooved plane is significantly higher than that along the ungrooved plane. Off-centre peaks were observed in the mean pressure profile of underexpanded jets from grooved nozzles. They were probably due to the streamwise vortices shed from the grooves.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
