Abstract
To reduce the corrosion of oil‐ and gas‐well equipment during acid treatment, the acid must be inhibited. The behaviour of N‐80 oilfield material in 15 per cent hydrochloric acid solution inhibited by different inhibitor formulations containing amine, ester and a quaternary ammonium compound was studied at 303K for five hours by the mass loss method. The corrosion rates were obtained by polarisation. Impedance studies were carried out to evaluate the performance of the inhibitor formulations. It was found that the formulation containing 3,000ppm amine, 1,000ppm ester and 1,000ppm quaternary ammonium compound was effective for the specific oil‐well tubular material.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.