Abstract
The main objective of this work is to investigate the bridging tractions in a model composite using optical fiber Bragg grating (FBG) sensors written into selected reinforcing fibers. Simultaneously, the crack opening displacement (COD) is measured using a speckle interferometry technique. The measurements are useful in the verification of the relation between the COD and bridging tractions established with the use of the weight function method. Center crack specimens made of epoxy and reinforced with one layer of optical fibers are prepared and tested under remote tension parallel to the fibers. Bragg gratings of 0.17 to 0.38 mm in length are introduced in selected fibers for direct, non invasive, local measurements of axial strains in these fibers. A controlled central crack, bridged by intact fibers, is introduced by a laser technique such that the FBGs are located between the crack faces. The results on the forces obtained from the FBGs and the COD-weight function method show good agreement. The experimental results also compare very well with 3-dimensional numerical simulations of the actual specimen geometry and loading configuration.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
