Abstract
This study assesses the efficacy of plasma-sprayed Cr2C3 coatings on AA6061 aluminum alloy in reducing erosion at different angles (30, 60, and 90°). The experimental setup involved maintaining a distance of 80 mm between the components, feeding the powder at a rate of 55 g/min, and applying a current density of 460 amps. Weight loss measurements and surface morphology analyses were performed using scanning electron and confocal microscopy. The findings suggest that the Cr2C3 coating significantly improves erosion resistance when compared to specimens without any coating. The erosion angle had a significant impact on the performance of the coating. The coating experienced the least weight loss at an angle of 30° (28.45 g), followed by increased losses at angles of 60° (30.34 g) and 90° (34.2 g). These findings emphasize the significance of the impact angle in determining the severity of material removal.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.