Abstract
The mechanical and electrical properties of several Pb-free solder joints have been investigated including the interfacial reactions, namely, the thickness and morphology of the intermetallic layers, which are correlated with the shear strength of the solder joint as well as its electrical resistance. A model joint was made by joining two “L-shaped” copper coupons with three Pb-free solders, Sn-3.5Ag (SA), Sn-3.8Ag-0.7Cu (SAC), and Sn-3.5Ag-3Bi (SAB) (all in wt.%), and combined with two surface finishes, Cu and Ni(P)/Au. The thickness and morphology of the intermetallic compounds (IMCs) formed at the interface were affected by solder composition, solder volume, and surface finish. The mechanical and electrical properties of Pb-free solder joints were evaluated and correlated with their interfacial reactions. The microstructure of the solder joints was also investigated to understand the electrical and mechanical characteristics of the Pb-free solder joints.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
