Abstract
This paper focuses on the studies of the electrochemical performance of arc-melted Hf-modified Ti-Zr based AB2 Laves type metal hydride battery anode alloys with composition HfxZr24-xTi6.5V3.9Mn22.2Fe3.8Ni38La0.3Sn0.3 (x = 1–4). The phase composition and the morphology of the alloys were characterized by X-ray Diffraction (XRD) and Scanning Electron Microscopy (SEM). Metal-gas interactions and electrochemical performances were studied by building PCT diagrams and by electrochemical tests performed in a 9 N KOH electrolyte solution at ambient temperature when using the half-cells in a three-electrode assembly.All studied alloys were two-phase and contained the Laves phase intermetallics of C15 (major constituent) and C14 (minor constituent) types. An increase in Hf content caused a growth of the abundance of the C14 phase and was accompanied by a decrease in the electrochemical discharge capacities, exchange current densities, and H diffusion rates as compared to the Hf-free alloy. Among the Hf-containing alloys, an introduction of 2 wt% Hf into the alloy's composition resulted in a higher H diffusion rate, while the highest H storage capacity has been reached for the alloy with the lowest, 1 wt%, content of Hf. The surface of the alloys contained catalysing hydrogen exchange metallic nickel clusters with the highest enrichment observed for the 2 wt% Hf alloy. An influence of Hf on the hydrogen storage and electrochemical performance can be understood in terms of the modification of the intrinsic properties of the alloys following a substitution (Zr/Ti) → Hf as C15 type alloys show the fastest hydrogen diffusion rates while a gradually increasing content of the hexagonal C14 type in the Hf-containing alloys slows down the H diffusion process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.