Structured Catalysts Prepared by Electroless Plating Technique onto a Metal Substrate, for a Wall-Type Hydrogen Production System

Abstract

This article reviews our works on the structured catalysts for a wall-type hydrogen production system including methanol steam reforming (MSR), CO shift reaction (CO SR) and methanol decomposition (MD). The structured catalysts were copper-based, palladium-based and nickel-based catalysts. Such a series of structured catalysts were prepared by the electroless plating technique that is a novel method for preparing a structured type catalyst onto a metal-substrate. The copper-based catalyst exhibited high performance for MSR and CO SR, the palladium-based catalyst high for MSR, and the nickel-based catalyst high for MD. The catalytic properties of these catalysts were affected by the difference of the plating condition and the pretreatment condition prior to the reaction. In the copper-based catalyst, the reforming and shift activities were enhanced by the oxidation treatment. One of the factors of such activity enhancement by the oxidation was thought to be in close proximity existence of copper and zinc atoms. A lot of monodentate-type formate species having high reactivity was formed on the oxidized catalyst, which would be correlated to the activity enhancement. In the palladium-based catalyst, the reforming activity was improved by the continuous reduction treatment followed by the oxidation. Such continuous pretreatment formed the PdZn alloy species thought to be a reforming site in the surface layer. The decomposition performance of the nickel-based catalyst depended on the ratio of the crystallite size of nickel particles to that of aluminum particles. The electronic influence of zinc and phosphorous components incorporated in the plated layer contributed to the improvement of the selectivity of product.