Structure-borne noise of railway composite bridge: Numerical simulation and experimental validation

Abstract

In order to investigate the characteristics of the noise from steel–concrete composite bridges under high-speed train loading, a model used to predict the bridge-borne noise is established and validated through a field experiment. The numerical model for noise prediction is developed based on the combination of spatial train–track–bridge coupled vibration theory and Statistical Energy Analysis (SEA). Firstly, train–track–bridge coupled vibration is adopted to obtain the velocity time history of the bridge deck vibration. Then, the velocity time history is transferred into frequency domain through FFT to serve as the vibratory energy of SEA deck subsystems. Finally, the transmission of the vibratory energy is obtained by solving the energy balance equations of SEA, and the sound radiation is computed using the vibro-acoustic theory. The numerically computed noise level is verified by a field measurement. It is determined that the dominant frequency of steel–concrete composite bridge-borne noise is 20−1000Hz. The noise from the bottom flange of steel longitudinal girder is less than other components in the whole frequency bands, while the noise from web of steel longitudinal girder is dominant in high frequency range above 315Hz. The noise from concrete deck dominates in low-frequency domain ranges from 80Hz to 160Hz.