Structure design of multi-functional flexible electrocardiogram electrodes based on PEDOT:PSS-coated fabrics

Abstract

Herein, Polyester woven fabrics as the matrices for the experimental group, while cotton knitted fabrics, cotton woven fabrics, and Polyethylene terephthalate (PET) mesh cloth used as the matrices for the control groups, at 40 °e, using 3,4-ethoxylene dioxy thiophene (EDOT)as the polymer monomer, FeCl3as the oxidant, and poly(sodium-p-styrenesulfonate) (PSS) as the dopant, are separately coated with PEDOT:PSS polymer to prepare flexible conductive composite fabrics. The influences of the fabric pattern, oxidant concentration, and monomer concentration on the electrical performance of composite fabrics are optimized. The maximal electrical conductivity of PET-based composite fabrics (218 S/m) occurs when monomer concentration is 0.035 mol/L, the molar ratio of oxidant to monomer is 2.5, and the dopant concentration is 2.5 g/L. Moreover, bacteriostasis rate of this composite fabric reaches 71.8%. Furthermore, by electrocardiogram (ECG) simulated human body unit test as well as human body ECG test, the optimal PET-based composite fabric electrode both has a lower impedance which helps form the stabilized ECG signal. The resulting fabric electrodes retain the soft and breathable advantages from fabrics and reduce the discomfort for a long-term use of conventional electrographic gel, thereby validating the empirical evidence for mobile, portable, wearable ECG electrodes.