Structure design boosts concomitant enhancement of permittivity, breakdown strength, discharged energy density and efficiency in all‐organic dielectrics

Abstract

Polymer-based nanocomposites with excellent flexibility and intrinsic high breakdown strength are promising candidates for high energy density capacitors compared to ceramics counterparts. However, their energy density is relatively low due to the trade-off between permittivity and breakdown strength. In this work, the authors proposed a ferroconcrete-like structure for all-organic nanocomposites via combinatorial electrospinning and hot-pressing method. In this structure, polymethyl methacrylate (PMMA) serves as matrix while poly(vinylidene fluoride-co-hexafluoropropylene) (P(VDF-HFP)) serves as reinforcement phase. This novel structure is highly effective in breaking the paradox of improved discharged energy density with decreased efficiency, as evidenced by the concurrently improved discharged energy density (∼12.15 J/cm3 compared to 8.82 J/cm3 of the matrix) and efficiency (∼81.7% compared to 76.8% of the matrix). Compared to conventional blending composite films, samples with ferroconcrete-like structure exhibit higher permittivity, breakdown strength, discharged energy density and efficiency. The superior energy storage performance is attributed to large aspect ratio P(VDF-HFP) fibres distributed perpendicularly to the external field, which brings about the extra enhancement of permittivity. Besides, mechanical properties are improved and restriction on carrier motion is facilitated, leading to enhanced breakdown strength and suppressed conduction. This work provides a new way to design dielectric composite for high energy density and efficiency applications.