Abstract

TiO2-Graphene Oxide intercalated composite (TiO2-Graphene Oxide) has been successfully prepared at low temperature (80°C) with graphite oxide (GO) and titanium sulfate (Ti(SO4)2) as initial reactants. GO was firstly exfoliated by NaOH and formed single and multi-layered graphite oxide mixture which can be defined as graphene oxide, [TiO]2+ induced by the hydrolysis of Ti(SO4)2 diffused into graphene oxide interlayer by electrostatic attraction. The nucleation and growth of TiO2 crystallites took place at low temperature and TiO2-Graphene Oxide composite was successfully synthesized. Furthermore, the photocatalytic properties of TiO2-Graphene Oxide under the irradiation of UV light were also studied. The results show that the degradation rate of methyl orange is 1.16 mg min−1 g−1(refer to the efficiency of the initial 15 min). Compared with P25 powder, this kind of intercalation composite owns much better efficiency. On the other hand, the reusable properties and stable properties of TiO2-Graphene Oxide intercalated composite are also discussed in this paper. At last, crystalline structure, interface status, thermal properties and microscopic structure of TiO2-Graphene Oxide were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), field emission scanning electron microscopy (FESEM) and high-resolution Transmission Electron Microscopy (HRTEM). Also, we have analyzed major influencing factors and mechanism of the composite structures which evidently improve the photocatalytic properties.

Highlights

  • TiO2-Graphene Oxide intercalated composite (TiO2-Graphene Oxide) has been successfully prepared at low temperature (80°C) with graphite oxide (GO) and titanium sulfate (Ti(SO4)2) as initial reactants

  • GO was firstly exfoliated by NaOH and formed single and multi-layered graphite oxide mixture which can be defined as graphene oxide, [TiO]2+ induced by the hydrolysis of Ti(SO4)2 diffused into graphene oxide interlayer by electrostatic attraction

  • Crystalline structure, interface status, thermal properties and microscopic structure of TiO2-Graphene Oxide were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), field emission scanning electron microscopy (FESEM) and high-resolution Transmission Electron Microscopy (HRTEM)

Read more

Summary

Materials

Reagents included concentrated sulfuric acid and sodium hydroxide were of analytic purity except titanium sulfate (chemical pure), purchased from Sinopharm Chemical Reagent Co, Ltd(SCRC) and without further purification before utilization. High purity deionized water made by ourselves was used as solvent. GO was prepared by modified Hummer method, the previous work carried out by our group [29]. P25 powders were purchased from Evonik Degussa

Preparation of TiO2-Graphene Oxide
Photocatalytic experiments
Reusable performance and stable performance tests
Characterization
XPS analysis
TG analysis
HR-TEM analysis
Photocatalytic properties
Reusable performance
Stable performance
Conclusions
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call