Abstract
Abstract Graded Cr/CrN/CrTiN coatings were deposited onto M42 HSS tool steel substrates by close field unbalanced magnetron sputtering (CF-UBMS). The effects of varying Ti sputtering current, I Ti , on the chemical composition, crystal structure, morphology and mechanical properties of the graded Cr/CrN/CrTiN coatings were investigated via XPS, XRD, AFM, electron microscopy techniques and nanoindentation tests. XPS and XRD results indicate that the CrTiN layer had formed as a solid solution nitride with fcc B1 type phase. The layers in the coatings were distinct and all the coatings exhibited a columnar microstructure, which decreased in size as the Ti content increased due to the increase in the Ti sputtering current. The mechanical properties of these coatings were determined by nanoindentation tests, which revealed an increase in hardness and modulus as the Ti content increased. However, the damage resistance of the coatings decreased with increasing Ti concentration. Furthermore, deformation behaviour of the coatings at high loads revealed a good resistance to plastic deformation and good adhesion strength for all coatings. These improvements, and the increase in hardness, are attributed to a combination of a decrease in grain size and a formation of solid solution nitride.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
