Structure and magnetic property of CoFe 2− xSm xO 4 ( x = 0–0.2) nanofibers prepared by sol–gel route

Abstract

CoFe 2− x Sm x O 4 ( x = 0–0.2) nanofibers with diameters about 100–300 nm have been prepared using the organic gel-thermal decomposition method. The composition, structure and magnetic properties of the CoFe 2− x Sm x O 4 nanofibers were investigated by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, inductive coupling plasma mass analyzer and vibrating sample magnetometer. The CoFe 2− x Sm x O 4 ( x = 0–0.2) nanofibers obtained at 500–700 °C are of a single spinel structure. But, at 800 °C with a relatively high Sm content of 0.15–0.2 the spinel CoFe 2− x Sm x O 4 ferrite is unstable and the second phase of perovskite SmFeO 3 occurs. The crystalline grain sizes of the CoFe 2− x Sm x O 4 nanofibers decrease with Sm contents, while increase with the calcination temperature. This grain reduction effect of the Sm 3+ ions doping is largely owing to the lattice strain and stress induced by the substitution of Fe 3+ ions with larger Sm 3+ ions in the ferrite. The saturation magnetization and coercivity increase with the crystallite size in the range of 8.8–57.3 nm, while decrease with the Sm content from 0 to 0.2 owing to a smaller magnetic moment of Sm 3+ ions. The perovskite SmFeO 3 in the composite nanofibers may contribute to a high coercivity due to the interface pinning, lattice distortion and stress in the ferrite grain boundary fixing and hindering the domain wall motion.