Abstract
Compared to other energy-generating technologies and energy conversion devices, intermediate-temperature solid oxide fuel cells (IT-SOFCs) have gained significant attention from energy experts due to its high energy density, moderate operating temperature (600–800°C), low emissions and reliability. Enhancing the performance of IT-SOFCs requires suitable and excellent cathode materials. Thus, a perovskite-type Nd0.5Ba0.5Zr0.8Fe0.2O3+δ (NBZFO) material was synthesised via traditional solid-state reaction technique and analysed as a potential cathode material for IT-SOFCs. Analysis of X-ray diffraction data (XRD) revealed a single-phase perovskite material that crystallises in cubic space group (pm-3m). The thermal and electrochemical properties were analysed with the aid of thermogravimetric analysis (TGA) and electrochemical impedance spectroscopy (EIS). NBZFO has an electrical conductivity in air of 80 S cm−1 at 400°C and a polarisation resistance (Rp) of 0.106 Ω cm2 at 800°C. TGA reveals a slight loss in weight of about 0.58%, thereby suggesting a highly stable cathode material for IT-SOFC. Electrochemical investigation shows that NBZFO has good electronic and ionic conductivity and excellent oxygen stichometry. Further studies are required to understand the effects of varying B-site composition of the cathode material.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Similar Papers
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.