Abstract

In this study, three typical wheat cultivars (ZM366, AK58, and ZM103) with high, medium, and low gluten strength, respectively, were selected as the raw material. The starch granules separated from different stages of the noodle-making process, including kneading, resting, sheeting, cutting, and drying, were used to explore the structure, dynamic rheology, and quality of the noodles. The D50 (median diameter) of the starch granules decreased during the noodle-making process, and the reduction was enhanced by an increase in the gluten strength of the flour. Between steps 4 and 5 of the noodle-making process, the solubility of ZM103 variety increased from 4.3% to 5.0% at 80 °C, while the peak viscosity decreased from 3626 to 3386 mPa s, which resulted in a decrease in the cooking loss of noodles. Similar trend was observed in the ZM366 and AK58 varieties. The gelatinization enthalpy was reduced, suggesting that the crystalline regions of the starch granules were destroyed during the kneading process. Between steps 4 and 5 of the noodle-making process, the elastic modulus of the starch granules significantly increased, while the temperature at which maximum elastic modulus was decreased, indicating an increase in the crystalline stability of starch during the drying process. Correlation analysis indicated that the changes occurred to the gelatinization property was primarily due to the change in the particle size.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.