Structural response of sandwich structures with CFRP face sheets under quasi-static indentation and high velocity impact: An experimental and numerical study

Abstract

Honeycomb sandwich structures (HSSs) with carbon fibre reinforced polymer (CFRP) composite face sheets are extensively used as light-weight structures in aerospace engineering due to their high strength-to-weight ratio and energy absorption properties. However, the composite face sheets are highly vulnerable to impact loads and cause damage to the structure based on the impact energy. This study investigates the structural response of HSS with CFRP face sheets under quasi-static indentation and a wide range of impact energy: low to high velocity impact. A finite-element model was developed and numerical simulations were carried out at various impact energies, thereby providing deeper insights into the impact dynamics and understanding various damage states such as dent, front face sheet perforation, core damage and rear face sheet penetration. The numerical simulation result was compared with the experimentally tested HSS using a single-stage gas gun under 53.6 J to validate the finite-element model in terms of deformation and damage status. A quasi-static indentation test was conducted and numerically predicted force data under impact test for the complete perforation case was compared to address the dependency of rate of loading. The carbon nanotube (CNT) with various weight percentages (wt%), such as 0.2, 0.4 and 0.6, was added to the matrix system through a vacuum assisted resin transfer technique and experiments were conducted at 79, 107 and 135 J. The impact resistance increases with CNT addition and hence no perforation was recorded for all the test cases of 0.6 wt% CNT addition. The influence of CNT addition on the damage area is more on the bottom face sheet and a 57% reduction in damage area was recorded for the case of 0.6 wt% CNT addition at 135 J impact energy when compared to the neat carbon/epoxy composite.