Structural optimization of downhole oil-water separator

Abstract

Downhole oil-water separator is the most important component of downhole oil-water separation system. Its structure has great effects on oil concentration of underflow (OCU) thus requiring further optimization. This work aims to propose an optimization method for the structural optimization of downhole oil-water separator that consists of two series de-oiling hydrocyclones. Firstly, the significant factors influencing OCU are identified by two-level Plackett-Burman Design (PBD) with twelve factors. Then the central levels of the five significant factors identified from PBD are determined by steepest ascent design. Secondly, response surface methodology (RSM) is used to establish the second order model between the OCU and five significant factors for the implementation of particle swarm optimization (PSO). Finally, the optimal structural parameters are obtained by PSO algorithm. Computational fluid dynamics (CFD) is employed to calculate the OCU for each particular case and analyze the separation performance variations before and after optimization. The simulation results show that compared with the original geometry and the best geometry in CCF design, the OCU of the optimized decreases. And the separation performance of the optimized geometry is remarkably improved for the oil droplets whose particle sizes are smaller than 35.78µm. Furthermore, laboratory experiments have been conducted to validate the proposed optimization method. The experimental results confirm that the OCU also reduces following the proposed optimization method. It can be summarized that PSO algorithm combined with PBD, steepest ascent design and RSM can be an effective method for the structural optimization of the downhole oil-water separator.