Structural, optical, and morphological properties of PVC-BaTiO3 nanocomposite films

Abstract

This work aims to fabricate barium titanate (BaTiO3) nanoparticles and study the effect of adding different contents of BaTiO3 nanoparticles on the structural, optical, and electrical properties of PVC polymer matrices. The PVC/BaTiO3 nanocomposite films were characterized by X-ray diffraction, FT-IR spectroscopy, and SEM. In addition, dielectric properties were studied within the frequency range of 0.1 KHz–6 MHZ. The XRD analysis reveals an amorphous nature of pure PVC with two characteristic peaks at 2θ = 17.09° and 2θ = 23.25°, and it reveals that BaTiO3 has sharp and narrow peaks. In PVC/BaTiO3 nanocomposite films, all XRD peaks of BaTiO3 appeared in all the samples with an increase in the average particle size from ∼46 nm to 55 nm. There is no shift of IR position in PVC bands, but the decreased intensity of some bands suggests complexation between PVC and BaTiO3. The UV–visible absorption spectrum of pure PVC has a band at λ = 278 nm. This band was shifted to 252 nm after adding BaTiO3 content. UV–visible transmission spectra demonstrate a decrease in the transmittance as an increase of BaTiO3 content from 89.23 % for pure PVC to 5.23 % for 0.1 wt% of BaTiO3. The values of the optical bandgap decrease with increasing BaTiO3 contents due to defect formation in PVC matrices. The optical parameters of the prepared nanocomposite films were also enhanced. The AC conductivity shows an increase with both frequency and BaTiO3 concentration, leading to enhanced movement of charge carriers and relaxation of interface polarization.