Abstract
The system Zn1-xMnxFe2O4 (x = 0, 2, and 4%) was prepared by sol–gel chemical route at 80 °C. X-Ray powder diffraction and Raman spectrum analysis were used to determine the preliminary phase of obtained samples. W–H and SSP plots were used to determine the crystallite size and micro-strain of samples. The surface charge and morphology of the samples were studied using zeta potential and scanning electron microscope analysis, respectively. The optical bandgap of the samples suggested that they were semiconducting. The dielectric characteristics of samples were examined as a function of temperature (60–600 °C) at various frequencies (1 kHz, 10 kHz, 100 kHz, and 1 MHz). The presence of interfacial and orientational polarization was indicated by dielectric constant and dissipation factor studies, which ranged from (0.7–460) to (0.3–0.8) with Mn and were found thermally stable up to 300 °C. The thermal dependence of DC conductivity demonstrates Arrhenius type transport with one, two, and three regions of conduction in sample ZF-0, ZF-2, and ZF-4 respectively. The sources of charge carriers in samples were $${V}_{o}^{\cdot \cdot }$$ , $$e^{\prime}$$ and dipole defects $$\left( {V_{o}^{{ \cdot \cdot }} - 2{Fe_{{Fe^{{3 + }} }}^{{2 + }}} ^{\prime } } \right)$$ / $$\left( {{2Mn^{{3 + }} _{Zn^{{2 + }} }}^.- 2{Fe_{{Fe^{{3 + }} }}^{{2 + }}} ^{\prime } } \right)$$ . The current work could help to identify the possible applications in semiconductor devices, thermally stable capacitors, and as mixed ionic electronic conductors in solid oxide fuel cells.
Highlights
Polycrystalline ferrites were classified as good magnetic semiconductors having low electrical conductivity and eddy currents, that play an essential role in various technological applications from microwave to radio wave frequencies [1, 2]
The present study focuses on the synthesis of Mn-doped ZnFe2O4 to investigate its properties for potential application in semiconductor and nano-devices
All the diffraction peaks in the X-ray diffraction (XRD) pattern correspond to the cubic spinel group of ZnFe2O4 crystallographic open database (COD) file no. 1010130 [5]
Summary
Polycrystalline ferrites were classified as good magnetic semiconductors having low electrical conductivity and eddy currents, that play an essential role in various technological applications from microwave to radio wave frequencies [1, 2]. Gradual increase of micro-strain may be associated to the difference of ionic radii between Mn and Zn, as well as the existence of defects as shown by equation (5) and (6) (See Table 1).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Materials Science: Materials in Electronics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.