Abstract

The preparation of Ni-Cd ferrite having the chemical formula Ni(1-x)CdxFe2O4 where x varies from 0, 0.1, 0.2, 0.3, 0.4, and 0.5 were synthesized by solid state reaction method. The X-ray analysis shows the existence of single phase spinel structure with increase of lattice parameter and density with increasing Cd contents were as the porosity decreases. The particle size was calculated by X-ray broadening studies. The Vickers hardness of Ni-Cd ferrite system variation between 532 to 568.6. The increase in hardness of composites results from increased Cd-content. The Atomic Force Microscopy (AFM) showed that the average grain size was increases with the increase in Cd content. The variation of dielectric constant, loss tangent and AC conductivity as a function of frequency in frequency range 100Hz-5MHz was studied. The dielectric constants decreases with increasing frequency for all the samples and follow the Maxwell-Wagner's interfacial polarization. The Hall coefficient was found to be positive. It demonstrates that the majority of charge carriers of p-type. The magnetic properties of Ni(1-x)CdxFe2O4 ferrites were strongly affected by the Cd content. The Mossbaure spectra show canted spin structure for all the samples.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.