Abstract
Abstract. Radioactive waste in Switzerland will be disposed of in a deep geological repository (DGR). Responsible for the planning and preparation of realization of this task is National Cooperative for the Disposal of Radioactive Waste (Nagra). Spent fuel assemblies (SFA) constitute the main high-level waste (HLW) stream that will be disposed in the DGR. Prior to final disposal they will be transferred or transported to an encapsulation plant, where they will be loaded into final disposal canisters. To ensure that the structural integrity of SFAs is not compromised during handling and transportation, it is desirable to characterize the expected mechanical parameters of SFAs after long-term interim storage. Experimental research activities performed at the JRC Karlsruhe include safety aspects of radioactive waste management, encompassing also spent fuel storage and spent fuel/HLW disposal activities. Nagra and JRC have established a collaboration to jointly study relevant properties and behaviours of spent fuel rods, with the support of the Gösgen nuclear power plant and of Framatome, and in collaboration with other partners in Europe and internationally. As part of this collaboration, 3-point bending and impact tests were performed at the hot-cell facilities of JRC Karlsruhe, to determine the mechanical response of spent fuel rodlets under quasi-static and dynamic loads. The structural integrity of fuel rods was also evaluated under different handling scenarios using finite element (FE) analysis. Starting with the construction of a static 3D FE model of a Pressurized Water Reactor (PWR) nuclear fuel rodlet in ANSYS Mechanical, Nagra has developed a series of FE models over the years. Mechanical properties of the original rodlet model were derived through an extensive validation process, using experimental data from the 3-point bending tests. To evaluate the mechanical response of an SFA in different loading scenarios, this model was expanded using 1D beam modeling approach. The development of the simplified 1D models is shown in this presentation. In particular, the effect of the contact formulation between the spacer grid and the rods is discussed. Finally, preliminary results of the bending response of a 15×15 PWR SFA sub-model are presented.
Highlights
As part of this collaboration, 3-point bending and impact tests were performed at the hot-cell facilities of JRC Karlsruhe, to determine the mechanical response of spent fuel rodlets under quasi-static and dynamic loads
Spent fuel assemblies (SFA) constitute the main high-level waste (HLW) stream that will be disposed in the deep geological repository (DGR)
To ensure that the structural integrity of SFAs is not compromised during handling and transportation, it is desirable to characterize the expected mechanical parameters of SFAs after long-term interim storage
Summary
As part of this collaboration, 3-point bending and impact tests were performed at the hot-cell facilities of JRC Karlsruhe, to determine the mechanical response of spent fuel rodlets under quasi-static and dynamic loads. Structural integrity investigations of spent nuclear fuel with finite element modeling Efstathios Vlassopoulos1, Susanne Pudollek1, Olympios Alifieris1, Dimitrios Papaioannou2, Ramil Nasyrow2, Ralf Gretter2, Vincenzo V. Responsible for the planning and preparation of realization of this task is National Cooperative for the Disposal of Radioactive Waste (Nagra).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have