Abstract
This paper investigates the possibilities of pultruded glass fibre rods as embedded reinforcement in SentryGlas (SG) laminated glass beams. To do so, a series of pullout tests, to investigate the bond strength of the rods to the laminate, and a series of beam tests, to investigate the post-breakage response of the beams, have been performed. Both test series have been conducted for round E-glass fibre rods and flat S-glass fibre rods. The pull-out tests showed superior pull-out strength of the flat rods, due to their large bond area. Furthermore, the beam tests showed superior post-breakage performance of the beams with the flat rods, due to higher strength and stiffness of the S-glass fibres. Overall, it is concluded that embedding glass fibre reinforcement in a SG-laminated glass beam is a very promising concept.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Infoscience (Ecole Polytechnique Fédérale de Lausanne)
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
