Structural fuse performance and earthquake-resilient performance of beam-column joints with replaceable T-stub

Abstract

In order to ensure that steel frame systems have excellent structural fuse performance and earthquake-resilient performance on the basis of good seismic performance, a novel steel beam-column joint with replaceable T-stub connection components (SBCJ-RTCCs) was proposed. The pseudo-static cyclic tests of original and replaced specimens were carried out. As an extension of the experimental tests, numerical parametric analyses were performed to determine an optimal range of resistance capacity ratio to make a balance between the seismic performance, structural fuse performance and earthquake-resilient performance. The analysis results demonstrated that despite seismic performance of specimen with a small resistance capacity ratio is relatively weak, the structural fuse performance and earthquake-resilient performance performed well. With the increase of resistance capacity ratio, the seismic performance consisting of initial stiffness and bearing capacity gradually improved. However, the plasticity and damage would be shifted from RTCCs to non-fuse components, which adversely affected the structural fuse performance, despite the earthquake-resilient performance of specimen was still good. In terms of comprehensive consideration of seismic performance, structural fuse performance and earthquake-resilient performance, the resistance capacity ratio was suggested as 0.53–0.63. Moreover, a design procedure of SBCJ-RTCCs was proposed, and its rationality was validated by a design example RT-D. The result indicates that by adopting the proposed design procedure, the RT-D exhibited stable hysteretic behavior without experiencing strength degradation. The RTCCs can play the role of structural fuses by dissipating more than 90% of the input energy, which effectively protect the non-fuse components from damage.