Abstract
AbstractMetal matrix composites with yttria as reinforcement are mostly produced because of it's improved mechanical properties while thermal stability, electrochemical and magnetic properties of the yttria based composites are rarely considered. In the present study, the feasibility of incorporating yttria nanoparticles into nickel matrix from ethylene glycol bath by electro‐codeposition method is demonstrated. The particle content of the coatings was strongly influenced by current density i. e. the rate of metal deposition. Particle content, surface morphology and microstructural changes of the deposits were investigated by scanning electron microscope (SEM) equipped with energy dispersed X‐ray analyzer (EDAX). A dense, compact and smoother composite surface with lower particle content was obtained at higher current densities. Crystallographic structure, texture and lattice strain have been evaluated using X‐ray diffraction (XRD). Incorporation of yttria particles inhibits the grain growth and causes grain refinement of the nickel matrix. Annealed nanocomposite deposits revealed thermal stability up to 700 °C. The comparative electrochemical corrosion behavior of the electrodeposited coatings in 3.5 % NaCl solution and their deposition potential were evaluated. Magnetic studies showed nearly complete absence of hysteresis i. e. soft magnetic nature of the coatings.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.