Abstract
With an attempt to replace petroleum-derived commercial graphite (CG) with biomass-derived carbon, microcrystalline cellulose (MCC) dissolved in 1-butyl-3-methylimidazolium acetate (BMIMAcO) was facilely carbonized to prepare cellulose-derived carbon under a low-temperature range of 250-1600 °C. TEM and AFM results revealed structural evolution of carbon nanosheets starting from carbon dots. The XRD and Raman results showed that the degree of crystallinity of the MCC-derived carbon was apparently enhanced as the temperature was increased to 93.02% at 1600 °C, while the XPS results revealed that the nitrogen content was greatly reduced with increasing temperature. BMIMAcO not only induced low-temperature graphitization of MCC-derived carbon but also provided nitrogen doping for the carbon. Used as an anode of lithium-ion batteries (LIBs), the carbon synthesized at 750 °C showed the best cyclic stability and reversible capacity (1052.22 mAh g-1 at 0.5 A g-1 after 100 cycles and 1017.46 mAh g-1 at 1 A g-1 after 1000 cycles) compared to other MCC-derived carbon and CG. In addition, the costs of cellulose-derived carbon are much lower than those of the petroleum-derived graphite, showing environmental and economical merits for LIB anode production.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have