Abstract
In this study, compressive strength, modulus of elasticity and steel tensile coupon tests are performed to determine material properties. Sixteen hollow cold formed steel tubes and 48 concrete filled steel tube specimens are used for axial compression tests. The effects of width/thickness ratio (b/t), the compressive strength of concrete and geometrical shape of cross section parameters on ultimate loads, axial stress, ductility and buckling behavior are investigated. Circular, hexagonal, rectangular and square sections, 18.75, 30.00, 50.00, 100.00 b/t ratio values and 13, 26, 35MPa concrete compressive strength values are chosen for the experimental procedure. Analytical models of specimens are developed using a finite element program (ABAQUS) and the results are compared. Circular specimens are the most effective samples according to both axial stress and ductility values. The concrete in tubes has experienced considerable amount of deformations which is not expected from such a brittle material in certain cases. The results provide an innovative perspective on using cold formed steel and concrete together as a composite material.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.