Abstract
Nanocomposites of polystyrene (PS) with modified CoAl-layered double hydroxide (CoAl–LDH) were prepared via simple solvent blending method and the effect of CoAl–LDH content on the structural and thermal properties was investigated. The structural and thermal properties of the nanocomposites were characterised by X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy, thermogravimetric analysis and differential scanning calorimetry. The nano-scale dispersion of the CoAl–LDH layers in the PS matrix is verified by the (0 0 3) XRD reflection of the modified CoAl–LDH. The XRD data show that the exfoliated PS/CoAl–LDH nanocomposites can be obtained by controlling the LDH loading of about 5 wt%. TEM analysis also confirms the formation of exfoliated PS nanocomposites with 3 wt% and 5 wt% LDH loading. The thermal degradation temperature of the PS nanocomposite containing 5 wt% CoAl–LDH is found to be 12°C higher than that of pure PS when 50% weight loss is selected as a point of comparison. The glass transition temperature (T g) of PS nanocomposites is about 14°C higher than that of pure PS.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.