Abstract
Zinc Oxide thin films were prepared for different precursor solution molarities from 0.025M to 0.1M by spray pyrolysis deposition technique. A comprehensive study was carried out to realize the effect of concentration of precursor on ZnO thin films. The optimized temperature of the glass substrate was 300°C. From the XRD data it is inferred that the films are polycrystalline and hexagonal wurtzite structure . The degree of preferred orientation were along diffraction planes (100), (002) and (101) for all the ZnO films. The intensity of the diffraction peak prepared with 0.1M concentration is higher than those prepared at lower concentrations. The grain size (D) was calculated using Debye-Scherrer formula. It was found that the average grain size increases, when the molar concentration increases. As the solution concentration increases, the band gap decreases. The films are transparent in the visible region (85%), and the transmittance decreases as the molar concentration increases, which is caused by optical scattering at grain boundaries.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
