Abstract
In the present work, we report the structural and optical properties of sol-gel synthesized Zn0.9(Cd1-xMgx)0.1O (0 ≤ x ≤ 1.0) nanostructured films investigated by using the X-ray diffraction, scanning electron microscopy, atomic force microscopy, electrical resistivity, optical absorption and photoluminescence spectroscopic techniques. The X-ray diffraction study has revealed the hexagonal wurtzite crystal structure having favorable c-axis orientation for the increase in Mg concentration. The stress-strain calculation reveals the compressive stresses in Cd rich films whereas Mg rich films experience the tensile stress. Reduction of grain size and surface roughness has been observed with the increase in Mg concentration with more spherical grains. The AFM and SEM micrographs reveal the smooth surface morphology of the synthesized films. The magnesium rich films show high transmission in the visible and NIR region but show decrease in it with the increase in Cd concentration. The band gap increases from 3.19 to 3.40 eV with increase in Mg content. The photoluminescence measurement reveals the decrease in the defects and increase in band gap with the increase in Mg content in the films. The electrical resistivity has been found to be increased from 0.3×10 2 to 169.4×10 2 Ω-cm with increase in Mg concentration. The present study reports that the compositions x=0.4 and x=0.6 have the optimized combination of optical transmittance and better electrical resistivity values in this system for their possible applications as transparent conductors. The present results provide important data for TCOs processing with an optimized content of metal dopants for better transparency and conductivity. Copyright © 2014 VBRI press.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.