Abstract
AbstractMicrocrystalline powders of yttrium barium copper oxide [YBa2Cu3O7] have been prepared by conventional ceramic preparation technique. The powder belong to orthorhombic symmetry with unit cell dimensions ‘a’=3.8214 Å, ‘b’=3.8877 Å and ‘c’=11.693 Å. XRD and SEM studies revealed that its particle size is in the micrometer range. Micro composites of polystyrene with different loading of yttrium barium copper oxide fillers were prepared by melt mixing in a brabender plasticorder at a rotor speed of 60 rpm. The lattice parameters of the constituent phases are the same in all the composites. Mechanical properties such as stress–strain behavior, Young's modulus, and tensile strength were studied as a function of filler loading. Addition of filler enhances the Young's modulus of the polymer. Because of the poor filler‐matrix adhesion, tensile strength and strain at break decreases with filler loading. To explore more carefully the degree of interfacial adhesion between the two phases, the results were analyzed by using models featuring an adhesion parameter. Finally experimental results were compared with theoretical predictions. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
