Structural and mechanical optimization of porous alumina structures fabricated by carbon sacrificial template

Abstract

The Taguchi method is used to optimize the manufacture of porous alumina made through reactive spark plasma sintering and carbon sacrificial template. The goal is to design a new versatile procedure that allows the fabrication of porous alumina with tailored physical properties. The structural and mechanical properties taken as target parameters were the subtle combination of porosity and Young’s modulus of the human cortical bone: typical pore size ¿100μm, and Young’s modulus in the range of 3–30 GPa. The input factors of the Taguchi method are wt.% of carbon, sintering time, calcination heating rate, and final heat treatment. Hg porosimetry, electron microscopy, uniaxial compression and computer aided tomography were used for the characterization of the porosity, pore size distribution, pore interconnectivity, and Young’s modulus. Finally, according to the conclusions of the Taguchi analysis, the parameters of the process were changed for the fabrication of the new samples with optimized properties. Highly porous structures with 90% interconnectivity, Young modulus of 5.5 ± 1.1 GPa, and compression strength of 49 ± 20 MPa, were obtained, successfully emulating the targeted properties.