Abstract
Proper design of agriculture implements is necessary in order to increase their working life time and reduce the farming costs. In this study Creo and ANSYS software were used to carry out finite element analysis of inclined type subsoiler. 3D model of inclined type subsoiler was made using Creo software and static structural analysis of subsoiler was carried out using ANSYS software. The dimensions of inclined type subsoiler was selected as per local manufacturing database of subsoiler whereas loading condition defined by maximum draft force which was exerted on inclined type subsoiler in field. Results of simulation showed that maximum deformation was observed as 2.74 mm at the end of the share while maximum equivalent (von-mises) stress was 280.71MPa at the clamp. Maximum principal stress and maximum shear stress were found as 283.30MPa and 46.24MPa, respectively in subsoiler. The value of factor of safety was 1.25 and it was observed that factor of safety was very low so optimized design is required.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
