Strong cation exchange monoliths for HPLC by Reactive Gelation

Abstract

Polymeric monolithic stationary phases for HPLC can be produced by Reactive Gelation. Unlike the conventional method of using porogens, such novel process consists of a number of separate steps, thus enabling a better control of the quality of the final material. A suspension of polymer nanoparticles in water is produced and subsequently swollen with hydrophobic monomers. The particles are then destabilised (usually by salt addition) to make them aggregate into a large percolating structure, the so-called monolith. Finally, the added monomer can then be polymerised to harden the structure. In this work, a polystyrene latex is used as the base material and functionalised by introduction of epoxide groups on the surface and subsequent reaction to sulphonic acid groups, yielding a SO3(-) density of 0.7 mmol/g dry material. Morphological investigations show 54% porosity made of 300 nm large pores. Van Deemter measurements of a large protein show no practical influence of diffusion limitations on the plate number. Finally, a preliminary separation of a test protein mixture is shown, demonstrating the potential of using ion-exchange chromatography on Reactive Gelation monoliths.