Abstract
Renewable natural fibers (e.g., cellulose nanocrystals (CNCs)) are being applied for reinforcing bio-based polylactic acid (PLA). For improvement in the interfacial compatibility between CNCs and PLA and the dispersibility of CNCs, a quaternary ammonium salt-coated CNCs (Q-CNCs) hybrid was prepared in this study based on an esterification self-polymerization method, and such hybrid was further utilized as a new strengthening/toughening nanofiller for producing the Q-CNCs-reinforced PLA composite. The results confirmed that quaternary ammonium salt coatings could efficiently enhance CNCs/PLA interfacial compatibility via mechanical interlocking and semi-interpenetrating networks. Attributing to the synergistic effect of quaternary ammonium salts and CNCs, a considerable enhancement in processing, mechanical, and thermal properties was gained in the obtained Q-CNCs-reinforced PLA composite. With the addition of 0.5 wt% Q-CNCs, the tensile strength, Young's modulus, and elongation at break of the Q-CNCs-reinforced PLA composite was raised by approximately 23 %, 37 % and 18 %, respectively; compared with pure PLA, the obtained composite had excellent bacteriostatic properties and good transparency. This work discusses the development of high-performance, low-cost and sustainable PLA-based composites on a potential application in packaging materials.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Biological Macromolecules
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
