Stressing State Analysis of Partially Prestressed Concrete Beams with High Strength Reinforcement Based on NSF Method.

Abstract

This paper analyzes the flexural behavior of a partially prestressed steel high-strength reinforced concrete beams based on the structural stress state theory and the numerical shape function method. First, the generalized strain energy density is formed by the measured strain data of the test beam to reflect the structural stress state of the beams, and then the Mann–Kendall criterion is used to judge characteristic points of the generalized strain energy density curve. Two characteristic points, namely, post-elastic boundary load and failure load, are detected, so that the whole loading process is divided into three structural stressing state stages. Unlike the ultimate load, failure load is defined according to the general law from quantitative to qualitative change, which represents the starting point of the failure stage of the beam. Then, experimental strains and deflections, strain/stress fields interpolated by the numerical shape function method, and internal forces calculated by integration are respectively analyzed to obtain their changing characteristics and working behavior around the characteristic points, which can also verify the correction and effectiveness of the Mann–Kendall criterion. In addition, through the analysis above, it can be known that the failure loads of the test beams can be effectively improved by increasing the prestressed reinforcement ratio or concrete strength.