Abstract
The purpose of this study was to evaluate defects/holes in trees using a stress wave tomo-graphic technique. Results revealed that there was a significant positive relationship of the residual disc diameter ratio with the stress wave velocity, and a negative relationship with a reduction in the corresponding stress wave velocity in the virtual radial direction. A difference in the mapped color and stress wave velocity between the hole area and its surrounding sound area was obvious, and when the ratio of the hole area to the cross-sectional area exceeded 2.3%, the hole was detectable by tomography. A significant positive relationship between wood density and stress wave velocity of the transverse section was found in this study. Moreover, above the fiber saturation point, stress wave velocities tended to decrease with increasing moisture contents using tomography. Experimental results could provide some vital information for detecting defect locations and sizes in trunk cross-sections.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
