Abstract
AbstractFlexural stress relaxations were measured for rigid polyurethane foams (PUF) and glass‐fiber‐reinforced rigid polyurethane foams (FRU). The results were successfully analyzed in terms of the five element Maxwell model: (1) Samples reinforced with longer fibers exhibit reduced stress relaxation and reduced temperature dependency of stress relaxation; (2) The increased expansion ratio reduces the flexural modulus of both reinforced and non‐reinforced materials, but the stress relaxation tends to increase greatly at the higher temperature for PUF, while not so greatly for FRU; (3) The temperature dependency of E1 decreases as longer fibers are used to reinforce the polyurethane. The dependency is minimal for the polyurethane reinforced with continuous fibers, where the reinforcing effect is maximal; and (4) The activation energy calculated from τ2 according to the Arrhenius plot is smaller for the longer fiber reinforced polyurethane foams.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.