Stress redistribution in notched specimens during fatigue cycling

Abstract

Most materials exhibit a change in stress-strain relationship when subjected to fatigue stresses. In this work, the effect of this change on the stress distribution across the throat of notched-plate specimens of mild steel is examined. Using a set of strain gages, the strain distribution across the specimens was determined under dynamic conditions for various numbers of cycles. Tests of unnotched specimens were used to obtain the cyclic stress-strain properties for corresponding numbers of cycles, and from these data the stress distribution in the notched specimens was determined. Tests in which the strain amplitude at the notch root was held constant revealed a decreasing maximum stress with fatigue cycles. In another series of tests, in which the load amplitude was constant, the maximum stress amplitude was observed to decrease with number of fatigue cycles, despite an increasing strain amplitude. In both types of tests, the stress-concentration factor was observed to decrease with increasing number of fatigue cycles.