Abstract
Abstract A straight-forward method for calculating the stress intensity factors (or the energy release rate and mode mixity) for interfacial cracks in bi-materials has been developed. An existing method for homogeneous materials, based on the computation of the energy release rate from the nodal forces and displacements given by a finite element analysis, was modified to include the mismatch in material properties. Thick thermal barrier coatings usually fail as a result of cracking near the interface. The influence of the thickness and the edge angle of the coating on the energy release rate and mode mixity for a small edge crack at the interface of a TBC system subjected to thermal loading was investigated. It was established that the high energy release rates obtained for thick coatings can be reduced by decreasing the edge angle of the coating. Additionally a comparison with energy release rates given by J-integral computations has been done.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.