Stress Intensity Factors for Cracks With Large Aspect Ratio in Cylinder

Abstract

A number of surface cracks with large aspect ratio have been detected in components of nuclear power plants in recent years. The depths of these cracks are even larger than the half-lengths. The solution of the stress intensity factor is very important for the structural integrity assessment of such cracked components. However, in the current codes, such as ASME Boiler and Pressure Vessel Code Section XI and the JSME Rules on Fitness-for-Service for Nuclear Power Plants, solutions of the stress intensity factors are provided for semi-elliptical surface cracks with a limitation of a/l ≤ 0.5, where a is the crack depth and l is the crack length. In order to assess structural integrity in a more rational way, the authors previously developed solutions of the stress intensity factor for semi-elliptical surface cracks in flat plates with a/l = 0.5 to 4 and a/t = 0.0 to 0.8, where t is the wall thickness. In this study, the solutions of the stress intensity factors were calculated for circumferential and axial surface semi-elliptical cracks with large aspect ratios in cylinders. The geometrical dimensions focused on were in the ranges of a/l = 0.5 to 4, a/t = 0.0 to 0.8 and t/Ri = 0 to 1/2, where t is the wall thickness and Ri is the inner radius of the cylinder. Some solutions were compared with the available existing solutions in order to confirm their applicability.