Abstract
ABSTRACT Aim The aim of this study was to evaluate the stress developed in the bar connecting implants and in the mandible as a result of the elastic deformation of the mandible during mouth opening when using a finite element method (FEM). Materials and methods A three-dimensional model of an edentulous mandible was generated based on the computer tomography (CT) data of a patient. Two cylindrical implants (diameter 4.3 mm, length 13 mm) were inserted in the area of the mandibular canine, premolar and molar in the mandibular model. Implants were connected with a rigid bar (width 2 mm, height 3 mm), and mouth opening was simulated on the threedimensional (3D) model. The location and magnitude of maximum von Misess stress that occurred in the mandible and in the bar were estimated. Results The highest stress level in the mandible (4.5 GPa) and in the splint (32 GPa) was measured in the longest fixed partial denture with the implants in the mandibular left canine and left second molar position. The maximum stress in the bone was measured distal to the splinted implants. Conclusion Since, great distance between splinted implants caused high stress during mouth opening, due to mandibular deformation, the use of a short span fixed partial denture supported by implants in the molar region of the edentulous mandible is probably more advantageous. How to cite this article Radnai M, Erdohelyi B, Szabó PI, Varga E. Stress in the Mandible with Splinted Dental Implants caused by Limited Flexure on Mouth Opening: An in vitro Study. Int J Exper Dent Sci, 2012;1(1):8-13.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Experimental Dental Science
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.