Abstract

Soils surrounding energy piles are often subjected to high overburden pressure. So far, the stress effects on the thermal conductivity of soils and hence the thermal performance of energy piles have not been well investigated. This study proposed a new model for the stress-dependent thermal conductivity of saturated and unsaturated soils. It was validated using the data from a series of new tests and the literature and is able to capture stress-induced variations of thermal conductivity. Then, it was applied to finite element analysis of energy piles’ heat transfer efficiency. The numerical results reveal that ignoring stress effects on thermal conductivity, as in the conventional analysis, underestimates the heat exchange rate between energy piles and ground. The underestimation is more significant for piles with a larger aspect ratio and a faster pipe flow velocity, especially when the ground is drier and more compressible. For example, when the pile is 0.6 m in diameter and 50 in aspect ratio, the underestimation is up to 18%, 15% and 4% for the clay, silt and sand, respectively. These results suggest that stress effects on thermal conductivity should be considered for better assessing the heat transfer efficiency of energy piles and other thermal geostructures.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call