Abstract
BackgroundThis study evaluated the presence of a silica-nylon mesh and two cantilever lengths on the biomechanical behavior of complete-arch implant-supported prostheses.Material and MethodsTwenty-four (24) complete mandibular arch implant-supported prostheses were divided into 4 groups according to the presence of reinforcing mesh (with or without) and the cantilever length (molar – 15 mm or premolar – 5 mm). The specimens were submitted to strain gauge analysis (30-kgf, 10 s) at different points (molar and premolar). Three-dimensional models were created based on the in vitro specimens, and the results in the bone (microstrain), prostheses (tensile stress), implants and prosthetic screws (von-Mises stress) were evaluated using the finite element method (FEM). All materials were considered homogeneous, isotropic and linear. Strain gauge data were submitted to 3-way analysis of variance and the Tukey test (α=.05). FEM results were qualitatively analyzed using colorimetric graphs.ResultsThe microstrain magnitude for the prostheses with reinforcement was 519.91±359 and 583.33±661 without reinforcement (p=.001). The microstrain values for loading on the molar was 867.49±784 and on the premolar was 235.75±145. FEM corroborated with the in vitro findings for the bone behavior. The load application in the premolar showed reduced stress concentration, and a significant difference was observed between the presence or absence of the reinforcement for the prostheses.ConclusionsSilica-nylon mesh reduced the peri-implant microstrain and the prosthesis stress regardless of the cantilever extension. For temporary complete-arch implant-supported prostheses, the limitation of the cantilever to the premolar region improves the biomechanical response during load application. Key words:Finite element analysis, biomechanical response, dental implants, prosthetic dentistry.
Highlights
The material for manufacturing complete-arch implant-supported prostheses may influence the absorption and distribution of chewing loads on implants, and influence the strain/reabsorption of surrounding bone [1]
For temporary complete-arch implant-supported prostheses, the limitation of the cantilever to the premolar region improves the biomechanical response during load application
This result is justified since this silica-nylon mesh is able to increase the mechanical strength and dimensional stability of acrylic [8] and bis-acryl [9] resins. This mesh is composed of Nylon 6.0 and silanized silica (0.5% volume) in order to combine the favorable properties of both materials in a single body [3,9]. Its manipulation allows it to be inserted inside the prosthesis and its flexibility allows this mesh to be individualized for each patient [3]
Summary
Silica-nylon mesh reduced the peri-implant microstrain and the prosthesis stress regardless of the cantilever extension.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.