Stress deformation properties of rock and rock discontinuities

Abstract

The results of an extensive literature survey on the stress deformation properties of rock materials and rock discontinuities are summarized. The results show that: (1) for rock tested under uniaxial conditions, the range of modulus is from about 1 to 100 GN/m 2, and the Poisson's ratio range is from 0.02 to 0.73 (0.46 if dilatant values are excluded) with an average value of 0.20; (2) for rock tested under triaxial conditions, the effects of nonlinearity and stress-dependency of the rock modulus are minor with hard, crystalline or homogeneous rock of low porosity, but are significant in porous, clastic or closely jointed rock; (3) anisotropy of the rock modulus is demonstrated mainly by variations in the modulus number or initial stiffness, while the nonlinearity and stress-dependency parameters are fairly constant with sample orientation; (4) nonlinearity and stress-dependency of the rock Poisson's ratio may be significant depending upon the magnitude of stress changes imposed, with the nonlinearity being more significant; and (5) limited data on rock discontinuities indicate that nonlinearity and stress-dependency effects may be quite large.