Abstract
Based on the 1# shield tunnel of SU ZHOU rail transit, a 3D discontinuous contact computational model of shield tunnel segment and bending bolts is built. This paper study about the stress and the deformation of shield tunnel segment with actual loads ,and the influences on shield tunnel segment by properly install the bolts. Result shows that timely apply pre-stress on the bolts could effectively decrease the deformations on segment joint by the shear resistance capacity of the bolts. The maximum deformation reduces from 3.580mm to 0.302mm. And there appear an open-angle which turn to outside or inside on segment joint. The maximum spacing of the open-angle is 0.66mm, and the maximum angle is 0.108 degree. In most position about shield tunnel segment, installed bolts reduced the axial forces and increased or reduced the bending moments.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
