Abstract
To explore a simple but novel method of strengthening gypsum material by cyanoacrylate infiltration. To evaluate the influence of cyanoacrylate on the mechanical properties of dental gypsum models. Gypsum specimens were polished to the dimension of 35 mmx4 mmx4 mm. Butyl-cyanoacrylate was diluted with chloroform at different concentrations, namely 20% and 30% cyanoacrylate. Gypsum specimens were infiltrated by diluting one component of cyanoacrylate at different concentrations for 8 h and then dried for analysis. The changes in elastic modulus, fracture toughness, compressive strength, biaxial strength, brinell hardness were measured. The data were analyzed using software OriginPro 8. The viscosity measurements indicated that diluted cyanoacrylate were Newtonian fluids and the viscosity increased slightly within the 48 hours of preparation but still similar as water at room temperature, which could be used to infiltrating gypsum. The gypsum infiltrated with cyanoacrylate exhibited good physicochemical properties. The biaxial strength, fracture toughness, compressive strength and brinell hardness of the gypsum were improved by 39%, 30%, 63% and 18%, respectively. Cyanoacrylate can significantly improve the strength of gypsum model which indicates the potential clinical application.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Hua xi kou qiang yi xue za zhi = Huaxi kouqiang yixue zazhi = West China journal of stomatology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
