Strength-Gain Characteristics and Swelling Response of Steel Slag and Steel Slag–Fly Ash Mixtures

Abstract

The shear strength and stiffness characteristics of steel slag indicate that it can potentially be utilized as a competent base/subbase material of bound and unbound pavement layers. However, concerns with respect to the utilization of steel slag remain due to its long-term swelling, corrosivity, and leaching characteristics. In this study, long-term swelling and corrosivity tests were performed on basic-oxygen-furnace steel slag (BOFSS) and electric-arc-furnace ladle steel slag [EAF(L)SS] generated in Indiana, USA. In order to reduce the 1D swelling strains of these slags, 5%, 10%, and 20% Class C fly ash (CCFA) and 10% ground rubber replacement ratios were used to prepare steel slag mixtures for testing. The improvement due to CCFA replacement was evaluated by performing unconfined compression and long-term swelling tests on selected steel slag–CCFA mixtures. The seven-day unconfined compression strengths of 90% EAF(L)SS + 10% CCFA and 90% BOFSS + 10% CCFA mixtures were 2,387 and 3,768 kPa, respectively. After nine months of monitoring, the maximum 1D swelling strains of soaked samples of BOFSS and EAF(L)SS mixtures prepared with 10% CCFA replacement were 0.1% or less. The unconfined compression and swelling test results for the steel slag–CCFA mixtures indicated superior strength gain characteristics and negligible swelling strains with time than for steel slags.