Strength Characteristics and In Situ Stress Measurement of Rock Cores from a Large Section Underground Station: A Case Study

Abstract

Chongqing is a mountain city in western China with a complex geological environment, which brings many difficulties to the construction of large sections of underground projects. In order to avoid serious problems in the construction of Guobo Station with large sections, intensive coring and laboratory tests were carried out to obtain the rock mass properties in detail. The boreholes reveal that the lithology of the rock mass in the project area consists mainly of mudstone and a small area of sandstone. The uniaxial compressive strength (UCS) and the Brazilian tensile strength (BTS) of mudstone are highly scattered, which are 4.43~42.43 MPa and 0.66~4.30 Mpa, respectively, but they all show a lognormal distribution. The average UCS of sandstone is 65.31 MPa, and the BTS is 3.06 MPa. Meanwhile, the softening coefficients of mudstone and sandstone are 0.33 and 0.73, which indicate that the water content has a great influence on the mechanical properties of the rock. For the in situ stress field, the relationship between the three principal stresses is as follows: the maximum horizontal principal stress > minimum horizontal principal stress > vertical principal stress, and the lateral pressure coefficient is 2.11~5.71. Based on the present experimental results, it is proposed that the potential risks of excavation include: (1) bias pressure (2) high in situ stress; (3) surrounding rock deterioration.