Strength characteristics and energy evolution of cement stone under true-triaxial loading conditions

Abstract

Oil well cement is a commonly used cementing material in oil and gas extraction engineering. Due to the change of stress conditions, it is prone to microcracks or micro annular gaps, leading safety concerns. To study the strength characteristics and energy evolution of oil well cement stone under three-dimensional stress states, a series of true-triaxial compression tests were carried out. Based on the experimental results, the mechanical properties and energy evolution mechanisms during the true-triaxial compression process of cement stone under different stress states were explored. The research results indicate that there is an intermediate principal stress effect on the true-triaxial compressive strength of cement stone specimens. When the minimum principal stress remains constant, the strength of cement stone first increases and then decreases with the increase of intermediate principal stress. When the minimum principal stress is 5MPa, the specimen exhibits brittle failure, with ε1 at peak stress approximately 0.015. As the minimum principal stress increases to 20MPa, the specimen gradually transits to plastic failure, with ε1 at failure exceeding 0.04. The type of failure is determined by the energy ratio at the time of failure; when there is more elastic energy, it results in brittle failure, otherwise it leads to ductile failure. Due to the high porosity of cement stone samples, most of the input energy is converted into dissipated energy. At minimum principal stresses of 5MPa, 10MPa and 20MPa, the ratio of peak dissipated energy to total input energy fluctuates around 0.55, 0.73 and 0.85, respectively. There is a strong linear relationship between the peak elastic energy, peak dissipated energy, and total input energy, with fitting correlation coefficients of 0.847 and 0.996, indicating that the cement stone sample also follows the linear energy storage law. A strength criterion for cement stone was established based on the modified Lade criterion, which is more suitable for describing the strength of high porosity materials compared to traditional strength criteria. Finally, based on the interaction mechanism between energy accumulation and energy dissipation, a nonlinear model of energy evolution in cement stone was established. The results of the theoretical model are in good agreement with the experimental data.