Abstract
The influence of different types of polyethylene (PE) substitutions as partial aggregate replacement of micro-steel fiber reinforced self-consolidating concrete (SCC) incorporating incinerator fly ash was investigated. The study focuses on the workability and hardened properties including mechanical, permeability properties, sulfate resistance and microstructure. Regardless of the polyethylene type, PE substitutions slightly decreased the compressive and flexural strength of SSC initially, however, the difference was compensated at later ages. SEM analysis of the interfacial transition zone showed that there was chemical interaction between PE and the matrix. Although PE substitutions increased the permeable porosity and sorptivity, it significantly improved the sulfate resistance of SCC. The influence of PE shape and size on workability and strength was found to be more important than its type. When considering the disposal of PE wastes and saving embodied energy, consuming recycled PE as partial aggregate replacement was more advantageous over virgin PE aggregate replaced concrete.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.